Warm Audio WA-87 Large-diaphragm Condenser Microphone

An '87 for the Rest of Us
Their acclaimed compressors and preamps have famously upset the pro audio price/performance ratio. When Warm Audio turned its attention to microphones with the WA-87, they set a high target: one of the most iconic large-diaphragm FET condenser mics in history. Flash back to any top recording studio in the 1970s. You'll see the venerable '87 everywhere. On toms, overheads, guitar cabs, brass, congas, vocals — you name it. Sweetwater engineers who have worked with different generations of this perennial studio favorite know that the vintage ones have a warmer, more forgiving sonic character. It's these circuit designs — dating back nearly half a century — that Warm Audio closely followed for the WA-87. Stellar performance, top-shelf parts, and amazing value: that's the Warm formula — and the WA-87 nails it.














Now Playing: Sweetwater Review and Demo







Demo on Female Vocal







Product Demo







What can the WA-87 do for you?
Every studio needs at least one pair of high-quality large-diaphragm condenser mics, and the Warm Audio WA-87 is designed after a legendary one. You can use the WA-87 on anything — with world-class results. It makes vocals pop. It makes toms sound gargantuan. It's a must-have for adding a bit of room to complement a close dynamic or ribbon on a guitar cabinet. It's an ideal choice for vibraphone, marimba, strings, and woodwinds. We've even used it on kick drums (the 10dB pad comes in handy here)! Its highpass filter is useful for killing low-end mud and rumble, and its three polar patterns — cardioid, omni, and figure-8 — further increase the WA-87's impressive versatility.




Quality components make the Warm difference
Warm Audio doesn't cut corners on components, but they do order parts and build in quantity, which keeps costs down and delivers amazing value. The WA-87 is built with premium all-discrete components such as Fairchild FETs (field effect transistors); polystyrene, tantalum, and WIMA film capacitors; and a genuine USA-made Cinemag output transformer. The mic also features a custom Lens Kondensator reproduction of the renowned K87 dual-diaphragm/dual-backplate capsule used in the earlier '87s. Premium parts and meticulous design deliver a superior-sounding microphone — one that doesn't cost a fortune. Give the WA-87 an audition in your studio: you'll hear what we're talking about.






Warm Audio WA-87 Large-diaphragm Condenser Microphone Features:

Designed after a classic, studio-standard large-diaphragm FET condenser mic
3 switchable polar patterns: cardioid, omnidirectional, and figure-8
LK-87-B-50V capsule reproduction of the vintage dual-backplate K87
Diaphragm: 6 micron, 1" gold-sputtered membrane
20Hz-20kHz frequency response
SPL (measured at .5% THD): 130dB (pad engaged), 120dB (pad disengaged)
10dB pad; 80Hz highpass filter
Genuine USA-made Cinemag output transformer
24k gold plated, 3 pin XLR (150 ohms)
15dB self-noise, 80dB signal-to-noise ratio
Includes shockmount, hard-mount, and wooden storage box





Tech Specs



Microphone Type
Condenser


Polar Pattern
Cardioid, Omni, Figure-8


Diaphragm Size
1" (25.4mm)


Frequency Response
20Hz-20kHz


Max SPL
125 dB SPL (0.5% THD @ 1kHz)


Output Impedance
150 ohms


Low Cut Filter
80Hz


Pads
-10dB


Power Source
48V phantom power


Color
Nickel


Connector
XLR


Manufacturer Part Number
WA 87





THKL:www.music-blvd.com 599USD
(P)