sE Electronics T2

What You Love About the sE 4400a, But Faster!

A perfect all-arounder! Many mics claim to be able to do anything, but this one really can! Based of the ultra flexable sE 4400a, the sE Electronics T2 is equally as at home in front of a screaming tube amp and more delicate sounding sources such as vocals or acoustic instruments. With its switchable polar patterns, two bass cuts, and pads, you can put this beauty to work doing just about anything. But it's titanium twin-diaphragm design gives the T2 incredibly-fast transients, perfect for percussive sounds. Get any sound, and get it faster.


sE Electronics T2 Condenser Microphone at a Glance:

Designed to offer vintage mic sound with fast attack
A ton of control options for versatility
A shockmount as incredible as the mic


Designed to offer vintage mic sound with fast attack
This mic is the ultimate combination of solid state performance and versatility. Based on the chassis and feature spec of sE's acclaimed 4400a, but with the highly specialized capsule of the original sE Titan, it delivers full and perfectly balanced mid and low frequencies. While its titanium capsule produces un-hyped but ultra-detailed high frequency response. It is ideally suited for percussive sounds, including drums, percussion, the attack of a guitar, hammer action on piano, kick drum, and slap bass.

A ton of control options for versatility
Just because a microphone can pickup anything doesn't mean it was intended to. But the sE T2 was designed from the ground up to sound terrific on almost any sound source out there. Taking cues from some well-known vintage European condensers, sE's whole priority was to offer you a microphone with enough options to be as at home working from a whisper to a scream. You have your choice of four polar patterns, two bass cuts, and two pads. This mic will tune to you.

A shockmount as incredible as the mic
It's not often a microphone's shockmount is as exciting as the mic itself. But that is the case with the sE T2. The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around and used flat against a drum head or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3/4" thick, it fits neatly in the palm of your hand. But it's also built to take a beating on the road. Well played sE.

sE Electronics T2 Condenser Microphone Features:

Large-diaphragm condenser mic with a versatile shockmount
Titanium capsules are perfect for percussive sound sources
Controls to dial the mic into your application
Polar Pattern: Cardioid, Figure 8, Omni, supercardioid
Incredibly forward-thinking shockmount
Frequency Response: 20Hz-20KHz
Requires +48V phantom power


On a drum kit, amp, or on vocals, the sE Electronics T2 can do it all!


Tech Specs




Microphone Type
Condenser


Polar Pattern
Cardioid, Supercardioid, Omni, Figure-8


Diaphragm Size
1" (25.4mm)


Frequency Response
20Hz-20kHz


Max SPL
122dB


Output Impedance
50 ohms


Self Noise
14dB (A weighted)


Low Cut Filter
60Hz, 120Hz


Pads
-10dB, -20dB


Color
Silver


Connector
XLR


Weight
0.6 lbs.


Included Accessories
Shock Mount, Carry Case


Manufacturer Part Number
T2



THSD: www.music-blvd.com $499(P)(I)