GNI AS1 Amp Simulator

GNI AS1 Amp Simulator
The GNI AS1 Amp Simulator is a “two in one” pedal, acting as an amplifier simulator, a booster pedal or both things at the same time. Three switches (mic, mod & amp) offer 27 different combinations of microphone position, amplifier characteristics and saturation (“drive”). Five potentiometers let you control drive, level and complete equalization (low, mid and high frequencies). An extra potentiometer lets you set booster’s gain. In addition, this bad boy also features a True Buffer Bypass circuit like all GNI pedals. The buffer lowers the impedance of the guitar signal preserving high end and level.
GNI AS1 Amp Simulator Controls:

Drive: This adjusts the amount of distortion (“drive”) of the pedal.
Low, Mid e High: These three controls allow you to equalize the sound, adjusting intensities of the respective ranges of frequencies.
Level: Effect’s output level. Note that if level is high and you activate the booster, you’ll probably get some additional distortion.
Boost: This adjusts booster’s intensity, from 0 to 8dB.
MIC: This simulates three different positions of the microphone capturing amplifier’s sound. Settings are off. (off-centered), cent. (centered) e class. (classical).
MOD: This lets you change global saturation (distortion) of the pedal. Settings are hot (most distorted), warm (medium) e clean.
AMP: Simulate characteristics of three of the most popular amplifiers. Settings are: body, crunch e tweed.
Effect led: Indicates when effect is on.
Booster led: Indicates when booster is active. Its color also changes according to booster’s intensity setting.

GNI AS1 Amp Simulator includes:

Users Manual

THSS: www.music-blvd.com
(P)