Jackson Audio FUZZ Modular Fuzz Pedal

A Must-Have Stompbox for Fuzz Connoisseurs
If you consider yourself a fuzz pedal connoisseur, the Jackson Audio FUZZ was created with you in mind. This hyper-versatile stompbox delivers the full gamut of gritty textures, from vintage-style fuzz at lower settings to snarling, spitting cacophony at higher settings. Plus, it cleans up exquisitely when you lower your guitar’s volume. A powerful 3-band, fully parametric EQ offers surgical sonic sculpting — your fuzz tones will never get lost in the mix again! Plus, by virtue of the FUZZ’s built-in octave effect, you’ll be able to nail early Hendrix-inspired tones with ease. You can also use the FUZZ to add a tone-bending boost to the front end of your amp. Beyond that, the FUZZ employs Jackson Audio’s modular, analog plug-in design, enabling you to replace the pedal’s fuzz circuit with a variety of modern- and vintage-style fuzzes. The FUZZ includes two analog plug-ins, Modern Fuzz and Fuzz Classic/Vintage, to get you started (additional plug-ins are sold separately). With this many options on tap, Jackson Audio’s the FUZZ may be the last fuzz pedal you ever need.





Powerful 3-band, fully parametric EQ
If your guitar tone lacks mids, you’ll get buried. If you crank the highs too much, you’ll shred everybody’s eardrums. If you crank the lows too much, you’re bound to get scolded by your bassist. That’s why the FUZZ includes a 3-band, fully parametric EQ. A top-mounted Bass knob gives you +/–20dB of low-end boost/cut, while internal Bass Freq and Bass Q trimmers enable you to fine-tune your low frequencies. Top-mounted Middle and Mid Freq knobs give you +/–20dB of midrange boost/cut with convenient sound sculpting, while an internal Mid Q trimmer supplies fine control over your mids. Finally, a top-mounted Treble knob gives you +/–20dB of high-end boost/cut, while an internal Treble Q trimmer lets you really dial in your highs. Thanks to the FUZZ’s parametric EQ, you’ll sound amazing through any amp in any room — you’ll never get lost in the mix again!


Includes a universe of super-sounding octave-up effects
Aiming for early Hendrix-style tones with straight-up fuzz won’t cut it — you need an octave effect to really get your “Purple Haze” on. Jeff Beck, Pete Townshend, and a stable of grunge-era guitarists also deployed this epic pairing with mind-blowing results. That’s why the Jackson Audio FUZZ includes a built-in octave circuit, making everything from pristine octave-up effects to glitchy, sputtery chaos within your grasp. You get plenty of control over the effect via Vol, Blend, and Oct knobs. At Sweetwater, we’ve found that adding a subtle octave-up effect to your leads provides a delicate tonal lift (a la Doyle Bramhall II), while cranking the Blend knob drenches your playing in mind-bending fuzzed-out psychedelia, especially with higher Oct knob settings. What’s more, positioning the Blend control fully counterclockwise acts as a boost, enabling you to slam your amp in true tone-bending fashion.


Replaceable fuzz circuit offers maximum customization
Every guitarist has their own individual tonal recipe. Old-school psychedelic rock aficionados dig their smiley-face-type fuzzes. Others chase later-era Jimi sounds. And then there are the Zeppelin-esque and Gilmour-ish tones, plus fuzz-drenched Corgan-style textures and Jack White’s oft-imitated garage-rock exploits. To accommodate the potential for an endless variety of tonal preferences, Jackson Audio outfitted the FUZZ with a replaceable fuzz circuit via analog plug-ins. This enables you to swap out this stompbox’s pre-installed Modern Fuzz without having to buy a new pedal. And since Jackson Audio is developing new plug-ins at an impressive rate, you’ll have plenty of opportunities for sonic exploration. Thanks to the FUZZ’s ultra-flexible design, discovering (and attaining) your signature tone has never been easier. Besides the pre-installed Modern Fuzz, the FUZZ pedal also comes with a Classic/Vintage Fuzz analog plug-in that’s guaranteed to elicit a sweet musical experience.
Note: While the FUZZ’s analog plug-ins are user swappable, installation requires that you disassemble the pedal, remove a pre-installed 18-pin module, and replace it with the new module. If you’re uncomfortable with installing electronic components (such as your computer’s RAM), we advise you to let Sweetwater handle it. Call your Sales Engineer for more information.

“In the 30 years since I began playing guitar, I have always loved fuzz pedals. I’ve bought countless versions of them over the years, but in my mind, they’ve always had a massive shortcoming. They desperately need more effective tone controls! That’s why I designed the FUZZ with a 3-band, fully parametric EQ.” — Brad Jackson


Jackson Audio FUZZ Pedal Features:

Modular fuzz pedal with 2 included analog plug-ins (more sold separately)
Top-mounted Bass knob with +/–20dB of low-end boost/cut
Internal Bass Freq and Bass Q trimmers fine-tune your low frequencies
Top-mounted Middle knob with +/–20dB of midrange boost/cut
Top-mounted Mid Freq knob selects your midrange frequency
Internal Mid Q trimmer supplies fine control over your mids
Top-mounted Treble knob with +/–20dB of high-end boost/cut
Internal Treble Q trimmer dials in your highs
Octave effect with Vol, Blend, and Oct knobs
Positioning the Blend control fully counterclockwise yields a tone-bending boost
Pre-installed Modern Fuzz analog plug-in ranges from vintage-style fuzz to snarling, spitting fuzz
Includes a Classic/Vintage Fuzz analog plug-in for classic smiley-face-type fuzz tones


Tech Specs

Manufacturer Part Number: FUZZ

www.music-blvd.com $279
(I)