Yorkville CA1 Installation Amplifier

The Yorkville CA1 Installation Amplifier is a public address amplifier designed specifically for installations where a versatile paging system with high quality music playback is required. Versatile input mixing capabilities make the CA1 the solution for small churches, boardrooms and conference room PA applications.

The Yorkville CA1 Installation Amplifier is ideal for restaurants, small clubs, offices and retail environments where a simple and reliable system capable of servicing multiple paging zones is required. Multiple inputs for microphone or source material, and voice activated paging from either a microphone or telephone matrix means the Yorkville CA1 can be used in virtually any application.

Unlike most installation amplifiers in this class, user selectable phantom power is available on three channels to drive condenser microphones, the type most commonly used on podiums or as a lavaliere (tie clip) microphone. XLR / TRS balanced combi-jack inputs and attenuated RCA unbalanced inputs ensure the Yorkville CA1 system can interface with any source (CD, Cassette, Satellite Tuner, DVD or video system) your installation may require. Capable of driving either a 4-ohm speaker load, or four separate 70-volt speaker systems (one 'system' per zone), the Yorkville CA1 system delivers 180 watts (mono). A pre-amp output is available to feed an auxiliary power amplifier or active subwoofer to enhance the system, or to feed video or audio recording equipment.

Yorkville CA1 Installation Amplifier Features

• 6 Channel Installation Amplifier
• 180 Watts
• 70-volt or 4-ohm output configuration
• Versatile input mixing capabilities
• XLR / TRS balanced combi-jack / attenuated RCA unbalanced inputs
• Individual volume control , clip & activity LED's per channel
• User selectable phantom power (available on three channels)

Yorkville CA1 Installation Amplifier Specifications

• Number of Channels: 6
• Inputs - 1/4" / XLR Combination: 3
• Inputs - RCA (unbal): 2
• Phantom Power: Yes
• Headphone Monitor Features: Yes - main Output
• Record Outputs: Yes
• Mixer - Signal to Noise Ratio (dB): Greater than 55dB
• Mixer - Freq Resp (Tone and EQ Flat, ±2dB): 50 - 15kHz
• Amp A - Power Output @ 4 Ohms: 180 Watts
• Amp A - Power Output - Other: 180 Watts 70-volts
• THD - 1kHz (dB): Less than 1%
• Cooling: Passive
• Finish: Black
• Chassis Construction: Steel
• Rackmount: Yes
• Other Features: Zone Paging / Telephone interface
• Dimensions (DWH, inches): 12 x 19 x 6
• Dimensions (DWH, cm): 320 x 480 x 150
• Weight (lbs/kg): 24 / 9