Skreddy Pedals Screw Driver

Every aspect of the Skreddy Pedals Screw Driver has been optimized for maximum versatility, lush and controllable vintage dirt voicing, noiseless performance, and ideal tonal balance. You will hear familiar shades of the Stones, Zeppelin, Floyd, Hendrix and SRV just to name a few but you will surely find your own unique voice loud and clear.

Controls:Volume, Gain, Sharpness, Brilliance and Pre-Gain.


The Sharpness aka Tone control dials in the amount of bass going into the distortion section, for everything from thin, twangy treble-boost to midrange grit to thick, fuzzy breakup.
Gaincontrols the tamed-down hybrid fuzz section (old-school silicon into germanium) and takes you from slightly gritty clean through touch-sensitive overdrive all the way to aggressive distortion.
The Brilliancecontrol is a trimpot accessible via a hole on the left side. Its default setting is around 70%, and you can get a lot more brilliance and bite or make it darker and smoother, to suit your amp and taste.
The Pre-Gaincontrol is a trimpot accessible via a hole on the right side. It sets the gain of the mosfet input stage. Its default setting is around 30% for a very transparent, lower-gain attack. You can go all the way to a rich-sounding clean boost with full, meaty bass frequencies undistorted (if you also turn down the Sharpness and Gain) OR, you can dial in a more aggressive, modern, compressed tone by turning up the Pre-Gain control.





www.music-blvd.com