Red Panda Remote 4 Tensor Switch

Tensor remote switch with 4 modes to access presets and pedal functions. Scribble strips above each switch can be labeled with a Sharpie and erased using isopropyl alcohol.
Connects to the Tensor or Particle 2 via a 1/4" TRS cable (included). The Tensor firmware needs to be version 1.1 or later (available here). The Remote 4 does not require power.
Size: 10" x 2.75" x 2.25" high
Tensor Remote switch modes



Mode
Switch
Function


1
A
Preset 1 (hold to save)


B
Preset 2 (hold to save)


C
Preset 3 (hold to save)


D
Preset 4 (hold to save)


2
A
Left footswitch


B
Right footswitch


C
Preset 1 (hold to save)


D
Preset 2 (hold to save)


3
A
Record / Overdub


B
Play / Stop


C
Play Once


D
Toggle TIME & PITCH (tap) Toggle SPEED (double tap)


4
A
Toggle SPEED knob


B
Toggle TIME knob


C
Toggle PITCH knob


D
Toggle RAND knob



Loop Sampler (Remote Mode 3)






Mode 3 is designed to use the Tensor as a loop sampler with live loop manipulation. Switches A-C control loop record, overdub, play, and retrigger functions. Switch 4 toggles between the current knob settings and the default (normal playback settings). For example, you can set SPEED to reverse and PITCH to -1 octave for instant access to reverse and half-speed effects. See the user's manual for complete details.
Configuring the Remote Switch:


Start with the pedal powered on and nothing plugged into the CTRL port.


Hold the right footswitch while plugging in the remote switch. The right LED will blink yellow 3 times
to indicate it is in CTRL configuration mode. You can release the right footswitch and begin configu-
ration immediately.


Press one of the buttons on the remote switch to select a mode.


Hold the right footswitch for 2 seconds to save the configuration. The right LED will blink green to
indicate that the configuration has been saved.


www.music-blvd.com $99
(I)