Markbass Little Mark TUBE 800 Bass Amp Head

Go solid state or tube with ample power.






The Little Mark Tube 800 bass amp head solves the "tube or solid state" dilemma. But it goes a step further by addressing that other perennial concern, "Will I have enough power?" The 800 watts from this powerful amp will satisfy any thirst for power, and the two bendable preamps give you the warmth and richness of a tube preamp, the clean attack of a solid state preamp, or a mix of both. The head features a mix control for mixing between solid state and tube. The result offers a range of sounds, from the crisp, Markbass sound in the solid state, to a full, heavy tube sound in the tube state, as well as anything in between. On the front panel there are two inputs with separate gain controls: one 1/4" jack, and one combo jack that accepts either an XLR or 1/4". The Vintage Loudspeaker Emulator (VLE) and Variable Preshape Filter (VPF) allow access to a wide array of timbres, from classic tones to modern hi-fi sound. A phantom power switch accompanies the XLR input, for using a microphone on a double bass. Mute control is as simple as a push and a pull on the master volume switch. Additional features include four bands of equalization, line out control, and pre-post EQ switch for the XLR out (on the rear panel). Markbass amps and combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country's voltage. Due to homologation issues, the voltage may not be changed. Rack ears not included. The head features a single 6205 miniature tube.


Markbass Little Mark TUBE 800 Bass Amp Head Features:


1 1/4" input,
1 XLR/1/4" input
Gain controls for each input
Master Volume
Line Out Level
Ground Lift switch (rear)
Pre/Post EQ switch (rear)
Mute Knob
Low, Mid, High EQ
Variable Preshape Filter
Vintage Loudspeaker Emulator
Balanced XLR line out


Save BIG when you buy today!


Markbass Little Mark TUBE 800 Bass Amp Head Specifications:


Input 1
Impedance: 500 kOhm,
Maximum Voltage: 15V

Input 2 (Balanced XLR/1/4" combo)
Impedance: 500 kOhm
Maximum Voltage: 15Vpp
Phantom power: 48V

Effect Return
Impedance: 33 kOhm,
Maximum Voltage: 10Vpp

Controls
Gain 1: -60 dB to +23 dB range; Gain 2: -60 dB to +23 dB range

Equalization
Low center frequency: 40 Hz; level: ±16 dB;
Low Mid center frequency: 360 Hz, level: ±16 dB; High Mid center frequency: 800 Hz, level: ±16 dB;
High center frequency: 10 kHz, level: ±16 dB; VPF (Variable Pre-shape Filter) center frequency: 380 Hz (cut); VLE (Vintage Loudspeaker Emulator) frequency range: 250 Hz-20 kHz (cut)

Weight: 6.31lb.
Dimensions: 2.8"H x 10.87"W x 10.1"D





*Estimate Shipping time between 5 - 12 weeks, or please call (083) 497-2227 for a special faster service price










www.music-blvd.com