Lehle P-Split III High Impedance Passive Signal Splitter

Lehle P-Split III High Impedance Passive Signal Splitter

Passive splitter and DI box
Absolutely no signal loss or hum
High-impedance LEHLE TRANSFORMER HZ with phase and ground switch
Suitable for balanced or unbalanced signals

The LEHLE P-SPLIT III combines passive splitting with the highest possible signal fidelity.Its applications range from splitting signals and eliminating hum, to balancing and reamplification along with any signal routing that requires a clean signal free from noise.
At its core is the high-end LEHLE TRANSFORMER HZ, which galvanically isolates the two outputs, eliminating any possibility of ground loops. The LEHLE TRANSFORMER HZ was specially designed for use with high-impedance signals but also splits low-impedance signals with uncompromising sound quality. The signal can be picked off either symmetrically or asymmetrically from the ISO output.By using the phase inverter switch with gold-plated contacts you can flip the signal phase at the ISO output, preventing phase cancellation from impairing signal reproduction.
The classic application for the LEHLE P-SPLIT III is splitting an input signal to two outputs, enabling you to connect an instrument to two devices, which may, for example, be two amplifiers, or an amp and a mixer/recording unit (PC/DAW). Thanks to its ability to pick off the balanced signal on the ISO output, the LEHLE P-SPLIT III is also eminently suitable for use as a high-quality compact DI box for all types of signal.
Another useful application for the LEHLE P-SPLIT III is as a hum suppressor. Frequently background noise caused by ground loops occurs when two electronic devices are connected to each other. The LEHLE P-SPLIT III provides a simple, but extremely effective remedy when installed between the two units. Using the ISO output, the devices are galvanically isolated and background noise becomes a thing of the past.
You can even use the versatile LEHLE P-SPLIT III as a passive mono summing unit for a stereo signal by using the DIR output as second input.And just in case you are looking for a power connection: the LEHLE P-SPLIT III performs all its functions without any need for a power supply.
Lehle P-Split III High Impedance Passive Signal Splitter Features:

Max Level: +20 dBu (THD < 1%, 50 Hz - 20 kHz)
Total harmonic distortion: 0.003 % (0 dBu, 1 kHz)
Frequency range: 20 Hz – 100 kHz -0.1/ +0.4 dB(source 600 Ω, load 1 MΩ)
Input impedance(transformer load impedance): min. 2 MΩ at 2 kHz



www.music-blvd.com $180
(P)