รายละเอียดสินค้า

MOEN GEC9 Effects Routing System
 
รหัสสินค้า : GEC9
ยี่ห้อ : MOEN
รุ่น : GEC9 Effects Routing System
สภาพสินค้า : สินค้ามือใหม่
Links : คลิกลิงค์ที่เกี่ยวข้อง
ราคา :9395.00 ฿
ราคาปกติ : 12495.00 ฿
รายละเอียดสินค้า :
MOEN GUITAR EFFECTS TECHNOLOGY  Authorized Dealer (Thailand)

Moen GEC-9 Guitar Effects Routing System, Looper, Pedal Switcher

The MOEN GEC9 is one of the worlds most versatile effects routing system where multiple combination effect send and return loops can be set-up and engaged by a single switch.

Built Like a Tank
GEC9 features an ultra compact enclosure, to endure heavy foot stomping, and is built to last for generations to come.

'Pop-less' Switching
Recall up to 50 presets instantly and silently. Thanks to the intelligent pop-cancellation circuitry, GEC9 eliminates the annoying "pop" sound whenever switching from different presets.

GEC9 offers unprecedented control over your guitar effect system
Seize control of your guitar sound and stage performance by arranging your effect pedal signal loops with room for up to 50 presets. With the MOEN GEC9, you are always in the drivers seat!
 

Features and Specs:

  • Recall presets instantly, 50 presets ( 5 presets/bank x 10banks).
  • 6 Series loops and 3 separate loops.
  • The separate loops can be used as latched switches for AMP channel switching, switching AMP channel by one preset!
  • Each separate loop can be used as programmable ABY switcher.
  • There are two output jacks which are able to output to two AMPs at the same time.
  • "POP" cancellation circuit, eliminates "POP" sound when switching effects.
  • Instant MUTE design. The MUTE is also a "Switch to TUNER" switch.
  • Buffered input/ Non-Bufferred input option.
  • Standard negative center DC9V power supply.
  • Wide switch distance avoid mis-stepping, 70mm/2.76inch switch distance.
  • Ultra Compact Enclosure Size: 430(L)x95(W)x30(H)mm / 16.9(L)x3.54(W)x3.74(H)inch.
 

Typical Configuration 1 - Connect 9 pedals

 
 

Configuration 2 - Separate loops as footswitch

In this configuration the separate loop send jack S7, S8, S9 are used to control the

amplifier channels. The amplifier preamp is connected to GEC9 LOOP1, makes it

possible to add modulation effects to the preamp.

 
 

Configuration 3 - Use multiple amplifiers

In this configuration, the separate loop9 is used to choose signal path to

different amp

 
 Configuration 4 - Control Pedals in AMP ext. loops

This setup put 6 pedals (LP1,LP2,LP3,LP4,LP5,LP6) in front of AMP and 3 pedals (LP7,LP8,LP9) into AMP LOOP.

Preset example (1=ON, 0=OFF):

PRESET1 - LP1,LP2...LP7,LP8,LP9 = 1 0 1 0 1 0 1 0 1,

The Signal flow is GUITAR-FX1-FX3-FX5-Preamp-FX7-FX9-Power AMP

PRESET2 - LP1,LP2...LP7,LP8,LP9 = 0 1 1 1 1 1 0 0 1,

The Signal flow is GUITAR-FX2-FX3-FX4-FX5-FX6-Preamp-FX9-Power AMP

 
 

| Demo 1 - Connect 9 single pedals |

| Demo 2 - Control guitar pedals and AMP channel in a preset |

| Demo 3 - Control different guitar pedals for different AMP |

| Mason Stoops demostrates GEC9 |

| Chris Osborne Demonstrates GEC9 |

| Setup 4 - Pedals in front of AMP and pedals in AMP loop |

| Setup 5 - 3 pedals in front AMP, 2 pedals in AMP loop, 3 channels control |

| Setup 6 - Work with 2 Amps, Choose one, the other, or both. |

| Setup 7 - from a friend |

| Setup 8 - How to use "BUF OUT" and Wah/Volume Pedal |

www.music-blvd.com

แก้ไขล่าสุด : 09/12/2014
    ร่วมแสดงความคิดเห็น
    ชื่อของคุณ : *
    อีเมล์ของคุณ : *
    รายละเอียด : *
    หมายเหตุ : กรุณากรอกข้อมูลที่มี * ทุกช่อง
    Validation Code :

    *